PRE-MADE Reclaimed X Metal Banqueting Dining Table

As your Table is totally bespoke, you have many factors to consider before ordering.

This will of course include;

• The exact length, by default we have increments of 100mm, but you can have any length.
• The width, largely this is governed by the boards but there are options.
• Whether existing seating matches the table height and chairs with arms slide under the frame.

As listed above, we offer the following bench options in our Dining Sets:

• 1 Long Bench
• 2 Long Benches
• 4 Benches (includes, 2 end benches and 2 long benches)

Our standard table and bench measuments are:

• Height of Table: 76cm (to the top edge) & 71cm (to the side apron). Please ask if you require a bespoke height.
• Bench Measurements: 330mm Wide x 460mm High x inside measurement of your table minus 40mm. End benches measure are the lenght of your chosen width of table. Side benches will nestle under the table when not in use.

For further information on all of the above, we recommend that you read through our Design & Measuring Guide page.

Table Top Stains:

Constructed from sections of used scaffold boards, the boards benefit from repeated sanding that are then stained with Manns environmentally friendly, high quality, water-based wood stain for interior wood (with a colour of your choice ) which is then protected with Fiddes Hard wax oil, a premium hard wax oil for interior wood surfaces made from a blend of natural oil and waxes. OR for grey tones we use Osmo Natural Oil woodstain an all-in-one protective oil and preserver.

Always hard to see correctly in photos due to light variations. As the tabletops are reclaimed boards, no two boards are the same, so will take the stain slightly differently. We do endeavour to get as close as match as possible on all our samples, but there may be a slight differences.

• Browse Interior Table Top Stains Here
• Order Samples Here
• Submit your final choice Here

Table Frame: 

The frame is constrcuted from 80cm x 80cm steel which is welded together to make a 'Square' shape and then powder coated to the RAL colour of your choice. As this table is Off-The-Shelf, the legs have already been powdercoated in Matte Black.

By default, our metal work comes in a Matte finish. Satin or Gloss finishes are available upon request.

Visit our Accessories page for;

• Fiddes Supreme Wax Polish (for Manns Stain)
• Fiddes Wood Surface Cleaner
• Osmo Natural Oil Wood Stain (for OSMO Stain)
• Scaffold Board Shelving 

We can deliver all over the UK & most of Europe, but please ask for rates & lead-times before you order (this includes the Scottish Highlands and any of the UK smaller islands).

Please visit our Delivery page for detailed information.

As with all wooden indoor furniture, your table (and benches) will require some aftercare. This will of course depend on where your table is kept e.g south facing conservatories.

The tabletop finish is hardy and does not require much care, however we do recommned a suitable furniture wax (not spray) from time to time - available in store.

If your table is delivered during the winter months, we strongly advise not to place it near a heat source or in a hot room for a few weeks so that the table can slowly settle to it's new environment,

Please visit our After Care page for indepth information.

Our current Lead-Times for this product are;

6-8 Weeks

We endeavour to dispatch our prodcuts as quick as possible. Our delivery estimate (not a gurantee) commences from either;

The first working day after ordering.

From the date of payment/deposit being received

10 full working days from frame & stain decision

whichever is the latter.

We do recommend to view our T&C's

before ordering.